Search results

HP / Agilent 01743-90905 1743A Oscilloscope Operating + Service Manual On the water showing no water source occasionally, I found the screen clogged, it was do to my filter case had debris in it (it was new mfg caused) another caution on water is if you have high pressure, it will cause leaks...

30 plus brews on my B20, no problems, increased cooling by adding thicker spacers on the fixed feet then level with the adjustable ones, this prevents the Fan Cavitation being too close to a surface, and of course replaced the fuse with a microwave duty one, waiting for a wire failure then...

I had only one overfill in about 30 brews so far on my B20, it was early on with one custom brew, (brewie bags were never a problem) I later found a double mill cures that and gives me brews right on the numbers, no efficiency problems, I do about three stirs during the mash, extend sparge to 30...

Yikes, haven't been on in a while and it looks like you boys have gone complete Geek-Ville! 20 trouble free brews on my B20 "stock unit" as it came with software B20 "3.0 maibock"I avoid using the APP when brewing, only for recipe loading and then DOUBLE check the transfer of all data as the...

They are set up now to do PayPal and shipping calculates when you add to shopping cart well before you sign into PayPal, originally they had you order then email them for the total and PayPal invoice, note when you order consider cost of shipping for say one false bottom is around $40.00 where...

If you review some of my postings on the eBay units and might help you out, I have two of them and with minimal work and ordering false bottoms and hop baskets they work perfectly..

The app can get you cross wise fast, do not try and run the brew via your pad or phone, I use my pad to configure and load recipes only then make damn sure you double check the load into the machine, I had one that dropped the Sparge water and caught it in time, the app appears to link and...

Taiwan items came in, nicely packed, shipping cost was maybe a bit less then if you were sending something from the US to Taiwan, also have now done a complete cycle on two eBay machines, all cleaning cycles, test brew and full brew, no problems after the simple pump repairs (cleaned machining...

YIKES! you guys playing with software scare me, a sure way to screw up any device unless you are a code writer, my B20's all three of them are on V 3.0 and in boil all max out and cycle around +-200 F, I think it's wise when using these types of heating elements to operate at a temp lower then...

for parts try here https://univision-taiwan.wixsite.com/univision/store I just placed an order with them...

I have tested Three units and they all run those same temps on the boil side, note I have a feeling they are set up to run the below max boil temp, a full out boil can cause an overflow so the cycling temps make sense, also after 15 brews through my original B20 all have come out right on the...

Just completed an order with the boys in Taiwan via PayPal, I buy and sell worldwide and from what I have seen of them they seem legit, one give away is they are charging true shipping rates not the usual Chinese free shipping or lowball price, they seem to be fairly good in English so...

LOL well a plus is you can always have that "CoffeeFather" to use when your Kurig breaks down I guess, I have some Keggles you can use for boat anchors....

$599 PLUS SHIPPING from CHINA another 4-500 bucks?? Grainfather lol are you kidding that modified coffee maker, the last thing any of those things are is all in one, your still dragging equipment all over the place and working outside unless you have taken over the kitchen! I will stick with...

T They take Paypal..

I received two of them, one was new and never used (boil-pump noise) found it assembled wrong easy fix the second looks to have been used once and had an overflow but here again clean and close to new, have not had time other then power up which was good...when buying these check the specifics...

I have received two of the eBay units, the first one was a new unit that must have been returned for a noisy boil pump, opened it up and found it had been assembled wrong, they had left the little keyed trust washer off, it was there but just next to the shaft, reinstalled ran a complete test...

Yes, mine just in this morning, it is a new unit with very light shipping damage, I took the bottom off to inspect and played around some with the boil pump as it was noisy on test simple pull apart and it must have had a peace of machining in (plastic etc) it, reassembled and WaLa runs perfect...

Yes the 500 seems more like it although the eBay used units totaled 89 which were at just one of their repair facilities, would think Zymatics sold even less units but they seem to have loads of the pacific northwest techie cash to burn, as for Facebook I wouldn't put to much faith in many...

Tabs an Tabs and vinegar, also if you want spotless glass out of your dish washer 1 cup of vinegar works wonders!