Ashevillain
Level 3 Potions Master
I'm looking to build a 2-3 peice bucket corny cleaning system with:
- a high power pump sitting on a false bottom
- CIP ball and dip tube connections
- heating element sitting underneath the false bottom?
I also have a 15gal kettle with a triclover for a heating element, this could serve as the cleaning vessel and opens up the idea of using a non submersible pump that can be used for other purposes.
Any ideas or suggestions?
Then a separate water hose connect for rinsing, and another bucket with a small pump for sani.
I am all set up for everything but the cleaning bucket. I have seen some heated, heavy duty corny cleaners, but none with both a good position for the heating element and a powerful pump for CIP ball.
I've found that if I do not keep my cleaning solution very hot, I cannot guarantee an impeccable clean with my weak pump and have to do reruns, heat supplemental water, or manually spot scrubbing using a light to see the crevices inside the corny. I also would really enjoy not discriminating between sacch and wild yeast/bacteria vessels, and know this is possible with the right cleaning practices on stainless.
I have 10+ kegs to clean any given session and half of them have normally been used for fermentation. I want to blast everything 110% clean and have beer ready kegs in 3-5mins per keg, being able to put another keg on cleaning as soon as one goes to rinse and so on
I have a decent budget for this as cleaning kegs impeccably in a short time has proven too hard for me as an individual
and its the main bottleneck to my beer pipeline. I am beginning to line up my parts, any help or suggestions are appreciated.
- a high power pump sitting on a false bottom
- CIP ball and dip tube connections
- heating element sitting underneath the false bottom?
I also have a 15gal kettle with a triclover for a heating element, this could serve as the cleaning vessel and opens up the idea of using a non submersible pump that can be used for other purposes.
Any ideas or suggestions?
Then a separate water hose connect for rinsing, and another bucket with a small pump for sani.
I am all set up for everything but the cleaning bucket. I have seen some heated, heavy duty corny cleaners, but none with both a good position for the heating element and a powerful pump for CIP ball.
I've found that if I do not keep my cleaning solution very hot, I cannot guarantee an impeccable clean with my weak pump and have to do reruns, heat supplemental water, or manually spot scrubbing using a light to see the crevices inside the corny. I also would really enjoy not discriminating between sacch and wild yeast/bacteria vessels, and know this is possible with the right cleaning practices on stainless.
I have 10+ kegs to clean any given session and half of them have normally been used for fermentation. I want to blast everything 110% clean and have beer ready kegs in 3-5mins per keg, being able to put another keg on cleaning as soon as one goes to rinse and so on
I have a decent budget for this as cleaning kegs impeccably in a short time has proven too hard for me as an individual
Last edited: