What was your biofine rate and what was your process? If it’s an older bottle, you have to shake the **** out of it before applying. It separates on its own over time.
I’ve been really enjoying this style on the lower end of the abv spectrum recently. This one is all North Star Pils with a hint of Carapils, Ella first wort (30 IBUs), Sabro WP (1 oz/gal) and Azacca/Cashmere dryhop (1.2 oz/gal). Finished at 4.8 abv. Never went thru 10 gal faster. I also am a big...
An old bottle of Pilsen light LME from Briess I had on hand. Good advice to wait until the last second of the boil. The last time I did this was in a panic after getting horrible mash efficiency on a triple and still needed a longer boil to hit my numbers. I looked oxidized going into the...
Mashed at 148F for 45 minutes and 162F for 30 (probably overkill as I ended up getting mash efficiency over 80% on my system for the first time). Pitched 1 million cells per mL per plato at 60F for 3 days until FG, brought it up to 65F for diacetyl for 3 days, hard crash to 35F for 2 days, dump...
Third batch was a real winner - Ella FWH, 15, and 5, with cashmere and Nelson in WP and DH. 100% Pilsner malt. 34/70 attenuated the s@*t out of this beer. Won’t complain with 8.2% DIPA after shooting for 7ish. Super clean with a bit of alcohol on the nose - definitely bringing the mash temps up...
I’ve found that the expression of these products (concentrated hop oils and full spectrum extracts) really shine the further back (I.e. closer to packaging) in the process that they’re added.
This works. There is also a fourth option - I add it to recirculation lines with biofine 24 hrs after a cold crash, purge with CO2, and recirculate the conical between the racking port and sampling valves for a few minutes.
I more or less use the set up from this thread (Recirculating hops in conical fermenter). Direct mount pump with as short of PVC. I haven’t noticed any O2 pickup versus rousing and the extraction I’ve noticed is substantially improved. I figure if there are no leaks while under positive pressure...
I personally keep head pressure at 8-10 psi, and recirculate for 5 min twice over 48 hrs for 10-gal batches, under pressure. I find pressure and spunded carb adds to the mouthfeel. To each their own. There’s no wrong way to do it. At this point, it’s become personally preference