I am selling the 20 gallon HERMS brewery that I've assembled. As of now I prefer to sell all together, but would separate the hot and cold sides. I will not ship, but could meet a buyer halfway driving. Everything functions well and equipment has been well maintained.
Hot Side - $2,000
Hot Side - $2,000
- Standard HERMS system
- 2x Blichmann RipTide pumps (edited to add 2/26/2023)
- Spike 20 gallon kettles with lids
- All connections Quick Disconnect (or NPT for permanent fittings)
- Controlled by a 50 Amp HoseHead controller
- Can run both 5500 Watt heating elements at the same time - great for mash ins / back to back batches
- Uses Strangebrew Elsinor but also set up for CraftBeerPi
- HLT
- All stainless
- 5500 watt element
- Thermowell for hot water temp
- HERMS coil out temp probe (Mash Temp in)
- Mash Tun
- Spike false bottom
- Temp probe for Mash temp out
- Boil Kettle
- 5500 watt element - set low enough so a 5 gallon batch is possible
- Whirlpool port is low so a 5 gallon batch is possible
- Thermowell
- Counter flow copper chiller
- Homemade
- Similar to 'branded' ones.
- straight 1/2" copper on wort side - easy to clean and no risk of clogging or low flow with heavily hopped beers
- Various yeast propagation supplies, water adjustments, some bags of malt, tools, grain mill (probably a barley crusher, can't recall) hoses, etc.
- 6" exhaust fan
- Stainless Table
- Two SS Brewtech 14 Gallon Unitanks with heating and cooling
- One 1/3 HP Glycol Chiller
- Stainless Table
- All connections triclamp
- Various pieces of packaging equipment, including a Stainless mesh filter for heavily dry hopped beers.
- 5 gallon ball lock kegs - sold separately
- Large Sink (36" deep basin stainless)
- Stainless shop vac
- Drying racks
- Cleaning supplies
Attachments
Last edited: