McKenzieTap
Member
I am looking for device that will over ride the internal thermostat of a window a/c to allow it to get to 37 degrees to create a cold room for kegs that is NOT a CoolBot. Any suggestions?
Last edited:
I don't know how much a coolbot is but I have used one of these since 2009 and it does what it is supposed to for me.Im looking for something that is NOT a CoolBot- too expensive as I need 5 of them.
What do you use it for? We are wanting to make a cold room for cold keg storage for a beer trailer.I don't know how much a coolbot is but I have used one of these since 2009 and it does what it is supposed to for me.
https://www.amazon.com/gp/product/B000E7NYY8/?tag=skimlinks_replacement-20
lol- if we cant afford a $349 CoolBot, we sure as heck cant afford 6 of those! lolhttps://www.homedepot.com/p/MRCOOL-...at-Pump-230-Volt-60-Hz-A-24-HP-230A/301582980
With one of these and some good insulation you can turn any room in to a walk in freezer. It’s the same thing gas stations use for their “beer caves” if you have ever seen one.
We need 5 of them because we are building 5 beer trailers. We already have the CoolBot on the trailer that is my profile pic.. But we are building 5 more.Why do you need 5 controllers? Also, how big is your chamber and what size AC unit are you putting in there? Make sure all that stuff is carefully planned out before you start buying materials or modifying things you can't return.
oh - each cnaber is different sizes- 4x8, 4x6, 4x7 and 6x4. We use 6000BTU a/cs.We need 5 of them because we are building 5 beer trailers. We already have the CoolBot on the trailer that is my profile pic.. But we are building 5 more.
We use ours on one of these heaters and haven't had any problems: https://www.amazon.com/gp/product/B0001WJ5TE/?tag=skimlinks_replacement-20What do you use it for? We are wanting to make a cold room for cold keg storage for a beer trailer.
Thank you but that has a lowest setting of 45 degrees. I need to get to the sweet 36 to 37 constant.I don't know how much a coolbot is but I have used one of these since 2009 and it does what it is supposed to for me.
https://www.amazon.com/gp/product/B000E7NYY8/?tag=skimlinks_replacement-20
You sent me a link to a home heater....?We use ours on one of these heaters and haven't had any problems: https://www.amazon.com/gp/product/B0001WJ5TE/?tag=skimlinks_replacement-20
I haven't tried to use it with an A/C.
You asked me what I used the temp controller for and I sent you a link to it.You sent me a link to a home heater....?
Hi have tried this. I'm very curious if it worksIf you have an analog a/c (knobs, no digital display, no remote) you can set it to max cool and plug it into an inkbird or other controller. If it's digital, you have to get into the internal wiring. The problem is, when the digital control looses power, that is, when the add-on control turns the compressor off, most models have to be restarted manually when power returns.
Enter your email address to join: