audiophool
Well-Known Member
Built on plans from The Electric Brewery.
Spike Brewing boil kettle with sight glass, 2” triclover element port and 5000 watt element
Spike Brewing HLT with 50’, ½” HERMS coil from Stainlessbrewing.com, 2” triclover and 5000 watt element
Amcel Mash Tun with sight tube, and false bottom from NorCal Brewing
Brew Controller with associated wires for power and temp probes
2 – Chugger pumps, one with Riptide conversion
Lots of silicon tubing with SS fittings, but you may want to get new tubing.
Counterflow chiller, plate chiller and immersion chiller.
1 plastic and 1 stainless 7.5 gallon fermenting containers. SS is from SS Brewing Technologies and has temp probe to control fermenting fridge.
Fermentation fridge with homebrew controller, made from a new wine refrigerator.
3 roller Monster Mill with gear motor and cabinet
4-tap keezer, one is for nitro.
2 – 10 lb CO2 tanks
1 – 5 lb CO2 tank
1 – N2 tank with regulator
1 – O2 tank with regulator and aerating wand
1 dual outlet CO2 regulator and 1 single outlet
5 – 5 gal kegs, all converted or bought as ball lock
2 – 2.5 gallon ball lock kegs
5L Erlenmeyer Flask
Magnetic stirrer
Milwaukee pH meter
Plus, all of the typical accessories such as refractometers, hydrometers, siphon, grain storage, keg cleaner and a bunch of stuff that seemed like a good idea when I bought it, but didn’t work out so well.
Not shipping and not breaking it up at this point. Located in Central Texas, between Austin and San Marcos. I can deliver within a reasonable distance if given adequate assurance that you are not wasting my time and gas.
$3,000 firm
Mike
Spike Brewing boil kettle with sight glass, 2” triclover element port and 5000 watt element
Spike Brewing HLT with 50’, ½” HERMS coil from Stainlessbrewing.com, 2” triclover and 5000 watt element
Amcel Mash Tun with sight tube, and false bottom from NorCal Brewing
Brew Controller with associated wires for power and temp probes
2 – Chugger pumps, one with Riptide conversion
Lots of silicon tubing with SS fittings, but you may want to get new tubing.
Counterflow chiller, plate chiller and immersion chiller.
1 plastic and 1 stainless 7.5 gallon fermenting containers. SS is from SS Brewing Technologies and has temp probe to control fermenting fridge.
Fermentation fridge with homebrew controller, made from a new wine refrigerator.
3 roller Monster Mill with gear motor and cabinet
4-tap keezer, one is for nitro.
2 – 10 lb CO2 tanks
1 – 5 lb CO2 tank
1 – N2 tank with regulator
1 – O2 tank with regulator and aerating wand
1 dual outlet CO2 regulator and 1 single outlet
5 – 5 gal kegs, all converted or bought as ball lock
2 – 2.5 gallon ball lock kegs
5L Erlenmeyer Flask
Magnetic stirrer
Milwaukee pH meter
Plus, all of the typical accessories such as refractometers, hydrometers, siphon, grain storage, keg cleaner and a bunch of stuff that seemed like a good idea when I bought it, but didn’t work out so well.
Not shipping and not breaking it up at this point. Located in Central Texas, between Austin and San Marcos. I can deliver within a reasonable distance if given adequate assurance that you are not wasting my time and gas.
$3,000 firm
Mike
Attachments
-
Brew controller.jpg1.9 MB · Views: 0
-
Boil Kettle.jpg1.9 MB · Views: 0
-
HLT with HERMS Coil.jpg2.2 MB · Views: 0
-
Mash Tun with false bottom.jpg1.5 MB · Views: 0
-
Keezer.jpg1.1 MB · Views: 0
-
Grain Mill 1.jpg1.7 MB · Views: 0
-
10 lb CO2 tank and immersion chiller.jpg1 MB · Views: 0
-
2.5 gal keg (1 of 2).jpg292 KB · Views: 0
-
5 Gal Kegs (2 of 5).jpg1.3 MB · Views: 0
-
Pumps.jpg915.7 KB · Views: 0
-
CO2 and N2 tanks and regulators.jpg723.9 KB · Views: 0