- Joined
- Nov 24, 2017
- Messages
- 171
- Reaction score
- 82
So I am still designing the layout of my Keezer System. I have a main regulator and 2 additional regulators. Was planning to use them all. I plan to connect the main regulator to the CO2 tank and have it feed the 2 downstream regulators for possibly having 2 different pressure settings. What is the best way to do this.
Thanks
Tom
- Should I put a T in the line from the main regulator and go from there to each downstream
- Should I directly connect one regulator to the main regulator and make if the high pressure regulator and then connect the lower pressure regulator to it.
- I was going to install a manifold off of each of the two downstream regulators for connection to individual tanks.
Thanks
Tom