COLObrewer
Well-Known Member
OK fellows, I'm in day 6 of my home malting project and finally I've started the drying process. Here is a pic of the fully modified barley, I started on March 1, this pic was taken at appx. 04:00 this morning (3-7-09). I started with 50lbs of raw seed barley from the local elevator (verified no treatment added, just cleaned raw barley) unknown yet if it is 2 row or 6 row, the elevator dude didn't know either. I neglected to get all the pictures transferred to a disk and I'm at work now so I'll be posting alot more pics of equipment and descriptions of the process later, maybe tomorrow, if anyone is interested.
Here is a pic of the malting/couching floor: 2x4 frame sandwiched by concrete tile board (3'x5').
And the oasting hoards that go in the dryer: Aluminum screen.
This is a long way from success as the malt is not dried yet and I have not tested it yet of course.
I plan to do test batches with this malt and 2row rahr with back to back runs with no other ingredients (except same water and hops) and as close to identical circumstances as I can get (mash temp, sparge temp, etc) to see what SG the new malt makes as compared to the 2row rahr.
Vern.
![3334670039_81d5499fc1.jpg](https://proxy.imagearchive.com/53f/53f68442370f17eadb3e4aed89d5616c.jpg)
Here is a pic of the malting/couching floor: 2x4 frame sandwiched by concrete tile board (3'x5').
![3334670105_868c00dbca.jpg](https://proxy.imagearchive.com/afd/afda04d7f93dadc13827047f0a96c49d.jpg)
And the oasting hoards that go in the dryer: Aluminum screen.
![3334670185_0096d08028.jpg](https://proxy.imagearchive.com/c53/c5379d891731265731ad9aeff3c9b892.jpg)
This is a long way from success as the malt is not dried yet and I have not tested it yet of course.
I plan to do test batches with this malt and 2row rahr with back to back runs with no other ingredients (except same water and hops) and as close to identical circumstances as I can get (mash temp, sparge temp, etc) to see what SG the new malt makes as compared to the 2row rahr.
Vern.