fluketamer
Well-Known Member
- Joined
- Dec 1, 2008
- Messages
- 923
- Reaction score
- 1,091
my return tube doesnt reach the top pan on my mash pipe. its about .5 inches above the pan. theres a lot of splashing and it leaves a channel in the center of the grain bed. not sure if this is bad ? i want to distribute the water better on wort recirculation during mash so theres no channel in my grain bed.
2 questions,
1) what would you reccomend for dispersion.
some options i have seen that interest me are :
and 2) is it better to just extended the tubing so it lays flat against the wall to circulate the wort over the top of the bed so theres less spraying/ oxygenation during the mash
like this :
is it better to do something like this to keep the return under / at the level of the liquid so it doesnt splah as much.
i guess im asking a hot side oxygen question also .
thanks
2 questions,
1) what would you reccomend for dispersion.
some options i have seen that interest me are :
![1705329908864.png 1705329908864.png](https://cdn.homebrewtalk.com/data/attach/779/779806-1705329908864.png)
![1705329933488.png 1705329933488.png](https://cdn.homebrewtalk.com/data/attach/779/779807-1705329933488.png)
![1705329978626.png 1705329978626.png](https://cdn.homebrewtalk.com/data/attach/779/779808-1705329978626.png)
![1705330213636.png 1705330213636.png](https://cdn.homebrewtalk.com/data/attach/779/779810-1705330213636.png)
![1705330309793.png 1705330309793.png](https://cdn.homebrewtalk.com/data/attach/779/779811-1705330309793.png)
and 2) is it better to just extended the tubing so it lays flat against the wall to circulate the wort over the top of the bed so theres less spraying/ oxygenation during the mash
like this :
![1705330667424.png 1705330667424.png](https://cdn.homebrewtalk.com/data/attach/779/779812-1705330667424.png)
is it better to do something like this to keep the return under / at the level of the liquid so it doesnt splah as much.
i guess im asking a hot side oxygen question also .
thanks