suggestions for mounting drip tray?

[jdphillips73]

How do you mount it? heres the tray I have.
http://www.homebrewing.org/10-X-6-Stainless-Steel-Drip-Tray-_p_886.html

I dont want to screw into the freezer. I was thinking of jb weld. Suggestions?

 

[Redlantern]

Magnets. Neodymium Magnet. Crazy strong and cheap. No drilling or permanent fixtures to the freezer

Super glue them to the drip tray

http://www.dx.com/c/hobbies-toys-899/toys-for-all-ages-803/magnets-gadgets-835

These babies are powerful. four tiny magnets will be plenty. Easy to do the job for less than $3.00. Get the smaller ones. the ones that are 1" x 1" square are very hard to pull apart - trust me, they are strong.....

 

[Redlantern]

Oh yeah - and put a layer between the magnets and the freezer - a piece of duct tape on the back of the magnet or something. They are strong enough to scratch the paint when you try to move them around.

 

[Peruvian802]

Are those magnets strong enough to hold a drop tray with a full pint glass on top?

 

[Redlantern]

I looked a their options and using four of the magnets in this set will be able to do that with zero problem. http://www.dx.com/p/20-x-5-x-2mm-powerful-ndfeb-magnets-silver-10-pcs-267152#.WJf6c_krLIU

 

[ba-brewer]

I seen this somewhere on someones keezer, so I built one.

Put a flat L bracket between these and set the drip tray on the top of the L bracket.

https://www.amazon.com/gp/product/B003LZTBKQ/ref=oh_aui_search_detailpage?ie=UTF8&psc=1


I glued a couple of these magnet under the drip tray to hold it in place on the bracket. Makes for easy removal to clean the drip tray.

https://www.amazon.com/gp/product/B0084UASJQ/ref=oh_aui_search_detailpage?ie=UTF8&psc=1