I have zero excuses, sir! Other than a new project that's >really close< to being released.
Rad!! And just in time for the weekend, to distract me from actually brewing .. I'll give this a try.
If you PR this to @LBussy, I can chime in with my own test results on the thread.
Pinning to a non-release is fraught with danger, but we'll see.
Hey everyone, I have a nit that's been bugging me for a long time, but wasn't motivated enough to look into a solution until now. I'm running an Orange Tilt->Tilt Repeater->TiltBridge->Google Sheets. As you can see in the screenshot, my date/time is always off by about a day and a half (In the past). Is this something that can be modified in the google sheet or Tiltbridge Template script? I looked on my tiltbridge web server, but didn't see any time zone/time settings (see below). I also validated my Google Sheet is set to the correct time zone (see below). I looked through the Tiltbridge template script and saw a few references to date or time, but wasn't sure how to change it without breaking everything (see below).
Any input is greatly appreciated
View attachment 725746
^^screenshot from current fermentation^^
}
function timepoint(why){
var ogdate = new Date('January 1, 1900');
return (why.getTime() - ogdate.getTime()) / (1000 * 60 * 60 * 24);
}
// Let's explicitly set Timepoint, even if it was provided.
// if (!form_data.Timepoint) {
form_data.Timepoint = timepoint(new Date());
//
for (i in headers){
if (headers == "Timestamp"){ // special case if you include a 'Timestamp' column
row.push(new Date());
^^references in script to time/date^^
View attachment 725744
^^screenshot from my master Google Sheet showing Time Zone setting^^
View attachment 725745
^^screenshot from TiltBridge Web App...no time/date settings that I could find^^
Definitely please update to the latest in BrewFlasher. It has a timezone offset setting. I believe the sheets have been updated as well.I'm not sure which version of TiltBridge I'm running...it was flashed probably a year+ ago with BrewFlasher if that gives you any indication.
View attachment 725856
^^screenshot of "About" Page in TiltBridge Web Application"
I recreated my Google Sheets probably 8-10 months ago.
I'm not sure which version of TiltBridge I'm running...it was flashed probably a year+ ago with BrewFlasher if that gives you any indication.
View attachment 725856
^^screenshot of "About" Page in TiltBridge Web Application"
I recreated my Google Sheets probably 8-10 months ago.
I recommend this one, available on Amazon. There are others on Aliexpress to save a couple of bucks but I've not directly tried these.
These are smaller screens, true, but they are performing much better in testing right now. Unless you are looking for the larger form factor, these may be the best bet.
That said, in theory, any 320 x 240 ILI9341 TFT should work if you really want the real estate.
ETA: If you get the recommended one there, be aware it is USB-C. You will need an appropriate data cable to get it flashed.
Lee,
Jesus Christ that’s expensive.Lee,
I have my first Tilt coming and I went with the ICQUANZX T-Display ESP32 WiFi and Bluetooth Module Development Board for 1.14 Inch LCD that you linked to previously. I was also looking at the case that you linked to, but I do not have a 3D printer. I did try a local company that allows you to upload the project files, but it showed the button as 5" and cost over $100 just for the button!
I was wondering if you could recommend a place to get the case printed? Either the files I downloaded were corrupt, or the place I was using did not view the files properly! I really like the look of that case and would like to use it! Can it be used without the button? If so then the company I was looking at using was around $25 for the top and bottom.
Can you double check your link (or post a photo of your specific board)? I’m getting an error when I try to access it.Hi there. I have this board and have the latest tiltbridge (as far as I know) installed on it.
It’s taking readings and transmitting just fine. However, the screen has been black since I flashed it.
How can I get the screen to display gravity, temp, etc?
Edit: Nevermind - Found it on Amazon!Sorry about that. It’s a:
TTGO T-Display ESP32 WiFi and Bluetooth Module Development Board for Arduino 1.14 Inch LCD esp32 Control Board(16MB)
I have been using my tilt via tiltbridge successfully for several months. After the last update it stopped showing in my fermentrack app. I can still access the tilt via tilts own phone app but I can not get it to communicate with Fermentrack. I have the following error messages when I have tried to correct the problem. "Unable to automatically update fermentrack url at tiltbridgeAP.local " This happens when I use the update tilt bridge automatically button. The second error I found was " python is missing required capability flags " the instructions are to SSH into PI and enter sudo setcap cap_net_raw,cap_net_admin+eip /usr/bin/python3.7 " That also has no effect.
Help
There's not a version number, per se, but you can check if you're on the latest version.I believe I am, but not completely sure. How do I check the Fermentrack version number?
It's likely "tiltbridge.local". If you are on Windows and unable to resolve that name, you may want to install Bonjour Print Services for Windows.I managed to build my tiltbridge and get it connected to the internet. I finally just got around to brewing, and it is working fine. My problem is I want to monitor it on a computer on the same WiFi network. I remember that I was able to view it in a browser window, but its been to long and I am to old to remember how I did it. Any help would be appreciated.
That did it! Thank you so much.It's likely "tiltbridge.local". If you are on Windows and unable to resolve that name, you may want to install Bonjour Print Services for Windows.
Any suggestions?
I tried it, and got an unable to access message.Are you able to access the TiltBridge's built-in webserver? If so, are you able to access it at http://tiltbridgeAP.local/ ?
This suggests an issue with your laptop - not TiltBridge. Check this troubleshooting page (different product, still applies.)I was able to able to connect at http://tiltbridgeap.local/ from my cell phone but not my laptop
I have run sudo app update and upgrade as well .Unable to automatically update fermentrack url at tiltbridgeAP.local " This happens when I use the update tilt bridge automatically button. The second error I found was " python is missing required capability flags " the instructions are to SSH into PI and enter sudo setcap cap_net_raw,cap_net_admin+eip /usr/bin/python3.7 " That also has no effect
Enter your email address to join: