XBOXHACKER
Member
- Joined
- Dec 14, 2018
- Messages
- 7
- Reaction score
- 0
TLDR; I have read a ton of things and tried a ton of things, but nothing helps.....
So we had a Halloween party the other day. I got 4 taps in my kegerator, so I filled 2 empty slots with Jai Alai (IPA) and Fat Tire. The Fat Tire and my seltzer poured fine. The IPA was PIA!!!!!
It would pop and foam like the keg had kicked. No matter where the PSI was.
Right now it is at ~10-11 PSI. I have used this before for this IPA. I would like to point out that I have never had this issue before.
Here is what I have done/changed:
Brand New Tap Faucet (installed a Nukatap FC) - No dice
Brand New Sankey D connector (not just o rings)- No Dice
New keg lube - No Dice
Went back to the old Faucet - No Dice
Went back to the FC Faucet - No Dice
Purged all CO2 from keg, started over from zero - No Dice
Low PSI - No Dice
High PSI - No Dice
10 PSI - No DIce
The Temp is about 35
The line is 3/16 and about 4'
The column is chilled as well.
Keg is full.
Like I said, never had this issue before.
So we had a Halloween party the other day. I got 4 taps in my kegerator, so I filled 2 empty slots with Jai Alai (IPA) and Fat Tire. The Fat Tire and my seltzer poured fine. The IPA was PIA!!!!!
It would pop and foam like the keg had kicked. No matter where the PSI was.
Right now it is at ~10-11 PSI. I have used this before for this IPA. I would like to point out that I have never had this issue before.
Here is what I have done/changed:
Brand New Tap Faucet (installed a Nukatap FC) - No dice
Brand New Sankey D connector (not just o rings)- No Dice
New keg lube - No Dice
Went back to the old Faucet - No Dice
Went back to the FC Faucet - No Dice
Purged all CO2 from keg, started over from zero - No Dice
Low PSI - No Dice
High PSI - No Dice
10 PSI - No DIce
The Temp is about 35
The line is 3/16 and about 4'
The column is chilled as well.
Keg is full.
Like I said, never had this issue before.
Attachments
Last edited: