mashdar

Well sure, but that's really not the same thing at all, is it?

I've never read anything that definitively proves that clear wort into the boil (or fermenter) is better than cloudy wort, or vice...

14ga cord would easily handle that stick thing you posted at that length.

I think it makes the most sense not to use it if you don't like it. I don't think baking soda is a good idea. Adding some thiamine...

False dichotomy! : ) Resisting the urge to hijack this thread more. We can start a new one if you want lol In theory you recirculate...

I use a 120V system (brewzilla gen 4 35L), and the ramps for strike and boil are not ideal, but otherwise it's great. I plug it in...

Although 120V is slower to heat than 240V kettles, it mostly counts when getting (cold) tap water to strike temps, and later the wort...

This is getting super off topic! But if you have a center reference, you can derive 0 degrees (A phase) and 180 degrees (B phase). This...

Industry nomenclature is A phase, B phase, C phase. But if you really want to get pedantic, there are 2 phases available in 240/120...

Depends on what you call zero. Personally, I'm happy using earth. You want to really get some people upset? Start talking about...

The phasing for a single phase panel goes A B A B A B. Adjacent spaces are always opposite phases. (edit: Was that a joke?)

Am I correct that you mashed first, drained, and then accidentally put too much water in for sparge? (Sparge comes after your 60m mash)...

Regulate the flow on the end of the garden hose before the lighter duty vinyl piece. By the way, silicone hose has an even lower...

That vinyl hose gets very soft due to the hot water streaming out. Then the high 35-65 psi pressure from your water supply will make...

Ok, proposed strategy below. Let me know if anyone has ideas for modification. Prepare ~5 canned quart ball jars with 900g water + 90g...