- Recipe Type
- All Grain
- Yeast
- Pacman
- Yeast Starter
- Absolutely
- Batch Size (Gallons)
- 5.00
- Original Gravity
- 1.077
- Final Gravity
- 1.013
- Boiling Time (Minutes)
- 60
- IBU
- 103+
- Color
- 7
- Primary Fermentation (# of Days & Temp)
- 14 days at 62
- Secondary Fermentation (# of Days & Temp)
- 1 week at 65 (dryhopping)
- Additional Fermentation
- Time in the keg
- Tasting Notes
- Very much like Stone Ruination, and it turned out really good!
14 lbs Pale Malt (2 Row) US (2.0 SRM) Grain 93.33 %
1 lbs Caramel/Crystal Malt - 20L (20.0 SRM) Grain 6.67 %
1.75 oz Magnum [14.00 %] (60 min) Hops 73.2 IBU
1.00 oz Centennial [9.60 %] (30 min) Hops 22.1 IBU
1.00 oz Centennial [9.60 %] (10 min) Hops 10.4 IBU
1.00 oz Centennial [9.60 %] (1 min) Hops 1.2 IBU
2.00 oz Centennial [9.60 %] (Dry Hop 7 days) Hops -
1 Pkgs Pacman Yeast (Wyeast) [Starter 50 ml] [Cultured] Yeast-Ale
You could use any well-attenuating clean ale yeast. WLP001, or Wyeast 1056 come to mind, or S05 for dry.
Mash at 152.
My beers seem to attenuate really well- so use a lower mash temp if you've have attenuation problems in the past. I got about 82% attenuation with the pacman yeast.
For extract, a full boil would be the same but use 8 pounds light or extra light DME.
For an extract batch with a 2.5 gallon boil, do this:
4 pounds DME
1 pound crystal 20
4 pounds DME (added at flame out)
Hopping the same.
1 lbs Caramel/Crystal Malt - 20L (20.0 SRM) Grain 6.67 %
1.75 oz Magnum [14.00 %] (60 min) Hops 73.2 IBU
1.00 oz Centennial [9.60 %] (30 min) Hops 22.1 IBU
1.00 oz Centennial [9.60 %] (10 min) Hops 10.4 IBU
1.00 oz Centennial [9.60 %] (1 min) Hops 1.2 IBU
2.00 oz Centennial [9.60 %] (Dry Hop 7 days) Hops -
1 Pkgs Pacman Yeast (Wyeast) [Starter 50 ml] [Cultured] Yeast-Ale
You could use any well-attenuating clean ale yeast. WLP001, or Wyeast 1056 come to mind, or S05 for dry.
Mash at 152.
My beers seem to attenuate really well- so use a lower mash temp if you've have attenuation problems in the past. I got about 82% attenuation with the pacman yeast.
For extract, a full boil would be the same but use 8 pounds light or extra light DME.
For an extract batch with a 2.5 gallon boil, do this:
4 pounds DME
1 pound crystal 20
4 pounds DME (added at flame out)
Hopping the same.