Hi All,
Looking to getting back to brewing after a very long layoff. I want to use the water from a local spring and i've sent it off to WL for analysis.
Here are the results:
pH 7.7
Total Dissolved Solids (TDS) Est, ppm 50
Electrical Conductivity, mmho/cm 0.08
Cations / Anions, me/L. 0.6/0.7
Sodium, Na. 2
Potassium, K. <1
Calcium, Ca 7
Magnesium, Mg. 2
Total Hardness, CaCO3 26
Nitrate, NO3-N. 0.1 (safe)
Sulfate, SO4-S 6
Chloride, Cl 3
Carbonate, CO3 <1
Bicarbonate, HCO3 14
Total Alkalinity, CaCO3 11
Total Phosphorus, P <0.1
Total Iron, Fe. <0.1
Other than some possible variability because it's a spring, does anyone see any gotchas or have any recommendations?
Thanks
Looking to getting back to brewing after a very long layoff. I want to use the water from a local spring and i've sent it off to WL for analysis.
Here are the results:
pH 7.7
Total Dissolved Solids (TDS) Est, ppm 50
Electrical Conductivity, mmho/cm 0.08
Cations / Anions, me/L. 0.6/0.7
Sodium, Na. 2
Potassium, K. <1
Calcium, Ca 7
Magnesium, Mg. 2
Total Hardness, CaCO3 26
Nitrate, NO3-N. 0.1 (safe)
Sulfate, SO4-S 6
Chloride, Cl 3
Carbonate, CO3 <1
Bicarbonate, HCO3 14
Total Alkalinity, CaCO3 11
Total Phosphorus, P <0.1
Total Iron, Fe. <0.1
Other than some possible variability because it's a spring, does anyone see any gotchas or have any recommendations?
Thanks