Ranger9913
Well-Known Member
I have an eHERMS system setup with a BCS-460. I'm running two 5500w elements in the system. Currently, I have the elements controlled by a DPDT 30A 240 switch. One pole is manual control of the element and the other pole is "auto" or allows the BCS to control it.
I've used this setup for about 15 brews now with no problems, however I'm about to build a bigger second system. I don't want to send that kind of voltage and amps to my switches. I am even thinking about making a DC system. In either case, I am assuming I will have to add a definite purpose contactor to my circuit and allow that to switch on the high current stuff.
Any suggestions on this or which contactors to use?
I've used this setup for about 15 brews now with no problems, however I'm about to build a bigger second system. I don't want to send that kind of voltage and amps to my switches. I am even thinking about making a DC system. In either case, I am assuming I will have to add a definite purpose contactor to my circuit and allow that to switch on the high current stuff.
Any suggestions on this or which contactors to use?